Today’s card is another card that I made for the AECP Educator’s Blog Hop but didn’t use. I ended up cutting down the original card base and adhering it to a background.
Supplies: Altenew Rose Gold embossing powder, Altenew Dandelion Wishes Stamp set, Altenew Crisp Dye Inks: Morning Frost, Evening Gray, Moon Rock, Canson Watercolor card stock, Altenew Half-tone Square Die, Versamark ink, Mister water bottle, craft foam, Neenah Solar White Classic Crest #110 card stock.
How I made it: Stamp the dandelions by putting ink on the stamp, spritzing the stamp with water, then stamping the image onto the watercolor card stock. Continue to do this for each dandelion and the stems. This creates a faux watercolor effect. Cut card stock down to 3 1/2″ x 3 1/2″ and then rub the four sides of the card stock square with Versamark ink and heat emboss with Altenew Rose Gold embossing powder. Stamp a 4 1/4″ x 5″ watercolor card stock with dandelion wisps and Altenew Evening Gray ink. Stamp dandelion wisps on 3 1/2″ x 3 1/2″ card front using Altenew Morning Frost ink. Heat emboss sentiment with Altenew Rose Gold embossing powder. Mount the card front onto card background with craft foam. Mount card front onto Neenah Solar White #110 card stock. Finished card is 4 1/4″ x 5″.
Hello and welcome back to Treasures In Letters. Today I am sharing the first card I made for the recent AECP Educators Card Blog Hop (see my post for Jan. 18, 2019).
Supplies: Black card stock, Neenah Solar White Classic Crest #110, gray card stock, Vellum, Altenew Dandelion Wishes Stamp and Die Set, Altenew Moroccan Mosaic Stamp, Altenew Pure White embossing powder, Altenew Crystal Clear embossing powder, Altenew Translucent Pearl embossing powder, Altenew Warp Speed stencil, Altenew Crisp Dye inks: Frayed Leaf, Evergreen, Forest Glades, Morning Frost, Lava Rock; Versamark ink.
How I made it: I started by rubbing Versamark ink on top of the Warp Speed stencil over Vellum. I then heat embossed with Altenew Translucent Pearl embossing powder. On the back of the vellum I stamped the dandelion wisps with Versamark and heat embossed with Altenew Pure White embossing powder. I wrapped this vellum piece around a gray piece of card stock 4″ x 5 1/4″. I stamped (on Neenah Solar White card stock #80), 1 full-head and 2 half-head dandelions with Altenew Morning Frost ink then with Versamark and Altenew Crystal Clear embossing powder. I stamped the seed centers with Altenew Lava Rock ink and the stems with Frayed Leaf, Forest Glades and Evergreen Altenew inks. The sentiments were heat embossed with Altenew Pure White embossing powder. The card was framed by 4 1/4″ x 5 1/2″ black card stock then mounted on #110 Neenah Solar White card stock.
Welcome back to Treasures in Letters, thank you for stopping by. Today I am sharing with you my second-runner up choice for the AECP Blog Hop that I participated in last Friday….so much fun!! And throughout this week I will show you some of the other cards I made on my journey to get to my final choice.
Here is my card for today. To make my card I used Altenew Warp Speed Stencil and dry embossed it in Vellum.
To make this card I heat embossed 1 full-head dandelion and 3 half-head dandelions with Versamark ink and WOW Superfine White Pearl Embossing Powder (on Neenah Solar White Classic Crest #80 card stock). I stamped the stems using Altenew Crisp Dye Inks in Frayed Leaf, Forest Glades, and Evergreen. I stamped the seed pods in Lava Rock.
I wrapped the vellum panel around a piece of 4″ x 5 1/4″ light gray card stock and used a tape roller to glue in place (in the back). I arranged my dandelions and taped down the full-head dandelion but used foam tape on the half-head dandelions. I used a touch of liquid glue on each of the vellum wisps to glue them down. I adhered the gray/vellum card front to craft foam then onto a deep green 4 1/4 x 5 1/2″ card stock, adhering the card front to a #110 Neenah Solar White Classic Crest card base. I heat embossed my sentiment onto deep green card stock using Altenew Pure White Embossing Powder.
The supplies I used for my card are: Altenew Warp Speed Stencil, Altenew Crisp Dye Inks: Frayed Leaf, Forest Glades, Evergreen, Lava Rock, Morning Frost; Altenew Translucent Pearl Embossing Powder, Altenew Pure White Embossing Powder, Altenew Build-A-Flower Chrysanthemum Stamp Set, Altenew Tulip Stamp Set, Vellum, Deep Green card stock, Versamark, WOW Super fine White Pearl Embosssing Powder, Craft Foam, and Neenah Solar White Classic Crest #80, #110 card stock.
Thanks again for stopping by. If you’d like to leave a comment, the button is in the top left corner of my blog. Have a great day!!
Welcome to Altenew Educators Blog Hop! As Altenew-Certified Educators, we were asked to share our FAVORITE (techniques, styles, Altenew supplies…)!
If you’ve been following along, you’ve just arrived from Teri Wilson’s blog. (If you find a broken link, you’ll find a master list of the hop links at the Altenew Card Blog. Click on the blue link above.)
My name is Patty and today I am taking part in the Altenew Educator Blog Hop. This is my first blog hop ever, so I am very excited! Thank you for stopping by.
I was part of the first group of AECP participants accepted in fall 2017. I really enjoyed being a part of the AECP, it gave me the accountability to practice the techniques that I learned in the videos, and the discipline to finish my cards and complete each Level. Virginia Lu was always so encouraging … and I really needed it…. because I would either over think or under question, which left me two – timing my “Challenges” (yes, doing them twice, except the last one…I learned). 🙂 It was a great experience, and my advice to any of you in the process is to take your time and enjoy it. Don’t worry about what any one else is doing or how fast they are going, enjoy YOUR journey and discover some techniques that you really like and a style that expresses who you are. That’s what makes the process so rewarding.
When I started the program I was so intimidated by the technology side of it, wanting my pictures to look nice, then uploading them….what’s Flickr?! Start a blog, hmmm, I’m not sure I’m ready for that…every thing seemed like it was going to be so hard and daunting to get right, but when you take things one step at a time and ask some questions, it really is pretty easy. I found Virginia was such a HUGE help (and still is), and now we have the wonderful Face Book page we can ask each other questions and help each other along. It’s great! Take advantage of it. I actually started my blog without asking my 2 very capable daughters to hold my hand all the way through it. 🙂 That’s a miracle itself.
The card I am sharing with you today uses the Dandelion Wishes Stamp and Die Set and it has had seven versions as I prepared for the blog hop. That may sound like a little much 🙂 (because it is) but I wanted to play with the stamp set and see what I could do to make it look like the dandelion wisps were light, fluffy and flying through the air. I hope to have captured it in my card today. At this point you might think that “my favorite” thing is to do something over and over again, but it’s not. 🙂 My favorite stamps are Dandelion Wishes and Freeform Greenery because I get excited to make something that has movement, as though the wind just blew. My favorite sentiment didn’t make it on my card today, but it did on one of the six trials…it is “just breathe” from the Moroccan Mosaic Stamp Set. Here’s my card. I hope you like it.
I die cut the vellum dandelions and wisps, along with 2 full-head and 3 half-head dandelions, and the stems, out of #80 Neenah Solar White card stock.
To prepare the dandelions I sprayed a bit of spray adhesive into an empty cardboard box and dipped the centers of the dandelion heads into the spray adhesive (it was a little wet) then attached them to the plain white die cuts of the same size. I did this for all five dandelion heads.
To assemble the card I used an adhesive roller to tack the stems to the dandelion heads. I then arranged the dandelions until I liked how they looked on the embossed background. I used small foam squares to glue the dandelions in place and trimmed the stems. I then sprayed some spray adhesive into a box, dipped the Dandelion wisps into the spray adhesive (it is wet) then adhered the Vellum dandelion wisps around the card as though they were being blown off of the dandelion heads.
To make the sentiment I used deep green card stock and heat embossed with Altenew Pure White Embossing Powder. I adhered the sentiment with foam tape. I adhered the card front to the card base with a layer of craft foam in between.
Supplies: The supplies I used were Neenah Solar White, Classic Crest #80, #110 card stock, Vellum, Altenew Crisp Dye inks: Frayed Leaf, Forest Glades, Evergreen, Evening Gray, Lava Rock; Versamark ink, Altenew Crystal Clear Embossing Powder, Altenew Translucent Pearl Embossing Powder, Altenew Pure White Embossing Powder, Craft foam, E600 Spray Adhesive, foam adhesive and flat sequins.
Altenew is giving away $30 Gift Certificates to THREE lucky winners! Please leave a comment on the Altenew Card Blog by Jan. 23rd for a chance to win. Three winners will be announced on the Altenew blogs on 1/25/2019.
To leave a comment on my post please go back to the top of my page and see the left hand column for Comments.
Continue following the blog hop by clicking on Nenette‘s link below:
Today I am highlighting a couple of cards that I made using a background that I created months ago and didn’t know what to do with it so I put it in my “stash”….the box you keep your practices, mistakes, and “I really like this but I don’t know what to do with it” stuff.
The supplies for this card are: Black card stock, Neenah Solar White Classic Crest #80, #110 card stock, Nuvo Shimmer Powders: Atlantis Burst, Blue Blitz, Cherry Bomb; My Favorite Things Stamps Bold Beautiful Die, Neat & Tangled So Many Sentiments Stamp, Altenew Pure White Embossing Powder, Versamark Ink, and foam tape.
The supplies for this card are the same (as my first card) with the addition of Simon Says Stamps Wonky Rectangle Dies and Altenew Hibiscus Bouquet Die Set (for the sentiment).
Today was my first day back to work after almost two weeks of vacation….I got so much done while I was out but, I have to admit….it felt good to be back 🙂
Today I have another wintry snowflake thank you card. It has a clean and simple look, I hope you like it.
Here are the supplies I used in my card: My Favorite Things Snowflake Dies, Wink of Stella Shimmer Pen, Versamark Ink, Altenew Pure White Embossing Powder, Black Card Stock, Neenah Solar White Classic Crest #80, #110, Gina K Crystalline Drops, Simon Says Stamp Tiny Words Stamp Set, Concord & 9th Wintry Edge Dies, Lawn Fawn Scripty Thanks, My Favorite Things In & Out Stitched Oval STA, Watercolor card stock, Nuvo Shimmer Powder: Atlantis Burst, Blue Blitz, Cherry Bomb, Altenew Inks: Sea Breeze, Aqualicious, Dew Drops, Turquoise, Concord & 9th Turnabout Stamp.
Today I was hoping to bring two new, wintery, thank you cards but one of them had a speck on its sentiment strip that I didn’t notice until I saw the photos. So I’ll share that one tomorrow… if I have a chance to rephotograph it.
Now that Christmas and the holidays are over, many of us have thank you cards that need to be written. Here is one that I made today for a dear friend of mine.
This card features an inlaid YOU sentiment that has been built up with 5 layers of white card stock behind the snowflake top layer. Here are the supplies I used: Concord & 9th All About You dies, Concord & 9th Snowflake Turnabout Stamp, Altenew Crisp Dye Inks: Sea Breeze, Aqualicious, Dew Drops, Turquoise; My Favorite Things Snowflake dies, Nuvo Shimmer Powder: Atlantis Burst, Bue Blitz, Cherry Bomb; Watercolor card stock, Simon Says StampTiny Words Stamp, Pretty Pink Posh sequins, Neenah Classic Crest Solar White #80, #110 card stock, and craft foam.
To make this card I used Altenew inks to stamp the Snowflake Turnabout stamp, changing colors each time I turned the stamp. I cut my panel down to 4″ x 5 1/4″. I cut the colored snowflakes, the thanks, and the background of YOU from pre-created card stock that I had in my stash. This pre-created card stock was made using watercolor card stock and Nuvo shimmer powders in Atlantis Burst, Blue Blitz and Cherry Bomb. (I sprayed the watercolor paper with water and then sprinkled the paper with a little of each color, spritzing with water and tilting the card stock until I liked how the background looked.) After die cutting the words thank and you from their respective card stocks, I cut 5 more of each of them in #80 white card stock, glueing all of them one on top of the other. I put craft foam on the back of the card front except where the word YOU had been die cut out. I glued craft foam around the cut-out YOU on the back of the card front. After adhering the card front to the card base, I inlaid the word YOUand glued the word thanks and the white heat embossed sentiment in place.